Two methods for testing the effectiveness of gas column bags taught by the gas column bag factory

For ecommerce companies that need to package their products for logistics transportation, cushioning packaging with air bags is one of the main packaging methods to protect the products from damage.

Air column bag for Baijiu

For major ecommerce companies, there is a wide variety of packaging materials in the market, and how to choose them can be a headache. Now, let the cushioning packaging manufacturer, Jitong Packaging, provide a few methods to test the effectiveness and efficiency of pneumatic bags based on years of cushioning packaging production knowledge.

1、 Check the load-bearing capacity of the buffer packaging.

In addition to the impact force generated by external forces during transportation, handling, and loading and unloading, the protected goods will also bear various forces. Under the action of these forces, the component of the buffering material on the protected goods will be greater than usual. So testing the load-bearing capacity of buffer packaging is an effective method. The inspection method is as follows: put the product into the selected buffer packaging, and throw it. If the product is not damaged, cushioning packaging is an effective packaging material.

2、 Test the recoverability of the product.

General hard cushioning materials have high impact energy absorption and are suitable for use in situations with low impact forces. The cushioning material should be able to absorb the energy generated by the impact, but it is important to note that the absorption performance of the material is suitable for the impact energy received, and the greater the absorption, the better.

As mentioned earlier, during transportation, handling, and loading and unloading, the goods will be subject to the impact force generated by external forces and collide back and forth within the cushioning packaging. If the selected cushioning packaging does not have good resilience, the space inside the cushioning packaging will become larger and larger, making the product extremely susceptible to damage. So testing the resilience of a product is an effective method. The testing method is as follows: put the product into a buffer packaging, shake, or directly press the back with your hand to remove the product or other applied force. If the selected buffer packaging rebounds immediately or quickly, then the selected packaging is an effective packaging material.

Throughout the current buffer packaging market, there are traditional buffer materials such as foam, pearl cotton, paper, etc., but these materials have general impact resistance, which is difficult to achieve the cushioning effect produced in modern transportation, and the products are easily damaged; Secondly, the packaging of such materials is not tidy and can easily leave debris on the goods.

The new cushioning material - air column bag fundamentally changes this situation. Firstly, the composition of the air column bag is made of PE and nylon, which have excellent tensile and recovery properties; In addition, inflatable bags are composed of 99% air and 1% film, and air has excellent impact energy and vibration absorption, which has good recovery ability. So the gas column bag fully meets the two methods of checking whether the buffer packaging is effective and efficient.

Furthermore, inflatable bags meet the seventh category of environmental resource recycling, which can be naturally degraded or recycled. They are environmentally friendly and not only cater to the environmental protection psychology of consumers, but also meet the requirements of the times. More importantly, the gas column bag has a small volume, convenient transportation and use, and the bag body is clean without leaving any debris on the product.